• Advanced IGBT inverter techno logy delivers superior TIG performance
  • Multifunction: MMA, DC TIG, AC TIG, Pulse TIG
  • AC square wave is especially suitable for welding aluminum and its alloy
  • DC square wave is suitable for welding stainless steel, alloy steel, carbon steel, copper and other non-ferrous metals
  • 2T/4T Function selectable on the front panel
  • Foot pedal to control current remotely is optional
  • Dig ital instrument for the welding current
  • Accurate adjustment can achieve great penetration, aesthetic appearance of weld seam and low consumption of electrode
TIG 200P AC/DC Features
  1. New design air duct increase the duty cycle, make it possible to work for a long time with big current.
  2. Integrated with DC TIG and Pulse TIG functions
  3. AC wave control circuit, greatly improve the arc stabilizing ability of small current.
  4. The layered structure of the first and second inverters,
    do a favor lo the dust prevention. reliability and maintenance.


earth clamp x 1pcs,
cable jolnt x 2pcs,
Inner hexagon spanner x 1pcs,
grounding cabfe 3meters.
TIG torch x 1set

Varilni aparat TIG 200P AC/DC združuje vse funkcionalnosti TIG in MMA varjenja

Varilcu omogoča varjenje širokega nabora kovin, kot je jeklo, nerjavno jeklo, aluminij, magnezij, aluminijeve zlitine, titan ter baker. Opremljen je z 32 bitnim mikroprocesorjem, ki mu omogoča celoten nabor nastavitev za dosego kar najboljših rezultatov varjenja.

Varilni aparat TIG 200P AC/DC podpira varjenje z enosmernim in izmeničnim varilnim tokom. Z enosmernim varilnim tokom varimo vsa jekla, nerjavna jekla, specialne kovine in njihove zlitine, z izmeničnim tokom pa aluminij, magnezij in njune zlitine.

Varilni aparat TIG 200P AC/DC je zaradi svojih lastnosti in nastavljivosti primeren za vsakega varilca in za vsako profesionalno ali domačo delavnico.


    Material: Carbon steel, Stainless steel, Low alloy steel
    Sheet thickness: 1.5 – 10 mm
    Stick diameter: 2.5 / 3.2 / 4.0 mm
    Current range: 20 – 200 A


    Input voltage: 1PH AC 220 V ± 15 %
    Input power: 4.8 @TIG; 6 @MMA
    Input current: 22A@TIG; 27A@MMA
    Rated output: 17.6 V / 190 A
    Output current: 5 – 190 A
    No-load voltage: 56 ± 5 V
    Duty Cycle % (40°C 10min): 190 A 30 %, 104 A 100 %
    Efficiency: 70 %
    Protection grade: IP21
    Insulation grade: F
    Net weight: 7.1 kg
    Gross weight: 9.1 kg
    Dimension of machine: 410 x 162 x 305 mm
    Dimension of package: 480 x 240 x 408 mm

    Power supply voltage: Single-phase AC 220V±15%
    Power supply frequency: 50/ 60 HZ
    Rated input current: 27 A @ MMA; 23 A @ TIG
    Output current regulation: 10 – 200 A
    Open circuit voltage: 56 ± 5 V
    Rated working voltage: 18 V
    Cleaning width: .40~40 %
    Duty ratio: 10-90 %
    Gas preflow time: 0-15 S
    Pulse frequency (low frequency): 0.2-20 HZ
    Base current: 10-200 A
    Initial current: 10-200 A
    Crater current: 10-200 A
    Remote control: Yes
    Arc striking means: High frequency arc striking
    Efficiency: 70 %
    Duty cycle: 40 %
    Power factor: 0.93
    Insulation grade: F
    Shell protection grade: IP21
    Net weight: 14.75 kg
    Gross weight: 18.1 kg
    Overall dimensions: 570 x 260 x 440 mm
    Maximum welding thickness: 15 mm

    Related products

    TIG 200P DC

    TIG 200P DC

    TUG 315 AC/DC

    TIG 315 AC/DC