INVERTER DC TIG/MMA WELDING MACHINE – IGBT TYPE
- Advanced IGBT inverter techno logy delivers superior TIG performance
- Multifunction: MMA, DC TIG, AC TIG, Pulse TIG
- AC square wave is especially suitable for welding aluminum and its alloy
- DC square wave is suitable for welding stainless steel, alloy steel, carbon steel, copper and other non-ferrous metals
- 2T/4T Function selectable on the front panel
- Foot pedal to control current remotely is optional
- Dig ital instrument for the welding current
- Accurate adjustment can achieve great penetration, aesthetic appearance of weld seam and low consumption of electrode

- New design air duct increase the duty cycle, make it possible to work for a long time with big current.
- Integrated with DC TIG and Pulse TIG functions
- AC wave control circuit, greatly improve the arc stabilizing ability of small current.
- The layered structure of the first and second inverters,
do a favor lo the dust prevention. reliability and maintenance.
Accessories
earth clamp x 1pcs,
cable jolnt x 2pcs,
Inner hexagon spanner x 1pcs,
grounding cabfe 3meters.
TIG torch x 1set
The TIG 315 AC / DC welding machine combines all the functionalities of TIG and MMA welding
It allows the welder to weld a wide range of metals such as steel, stainless steel, aluminum, magnesium, aluminum alloys, titanium and copper. It is equipped with a 32-bit microprocessor, which allows it a full range of settings to achieve the best possible welding results.
The TIG 315 AC / DC welding machine supports DC and AC welding. We weld all steels, stainless steels, special metals and their alloys with direct welding, and aluminum, magnesium and their alloys with alternating current.
Due to its properties and adjustability, the TIG 315 AC / DC welding machine is suitable for every welder and for every professional or home workshop.
Welding
Material: Carbon steel, Stainless steel, Low alloy steel
Sheet thickness: 1.5 – 10 mm
Stick diameter: 2.5 / 3.2 / 4.0 mm
Current range: 20 – 200 A
Specification
Input voltage: 3PH AC 315 V ± 15 %
Input power: 9.2 @TIG; 13.2 @MMA
Input current: 14 A @TIG; 20 A @MMA
Rated output: 5 – 315 A
Output current: TIG 5 – 315 A; MMA 20 – 315 A
No-load voltage: 70 ± 5 V
Duty Cycle % (40°C 10min): 315 A 60 %, 244 A 100 %
Efficiency: 80 %
Protection grade: IP21
Insulation grade: F
Net weight: 43.7 kg
Gross weight: 51.3 kg
Dimension of machine: 690 x 335 x 550 mm
Dimension of package: 740 x 400 x 630 mm
Power supply voltage: Single-phase AC 220V±15%
Power supply frequency: 50/ 60 HZ
Rated input current: 27 A @ MMA; 23 A @ TIG
Output current regulation: 10 – 200 A
Open circuit voltage: 56 ± 5 V
Rated working voltage: 18 V
Cleaning width: .40~40 %
Duty ratio: 10-90 %
Gas preflow time: 0-15 S
Pulse frequency (low frequency): 0.2-20 HZ
Base current: 10-200 A
Initial current: 10-200 A
Crater current: 10-200 A
Remote control: Yes
Arc striking means: High frequency arc striking
Efficiency: 70 %
Duty cycle: 40 %
Power factor: 0.93
Insulation grade: F
Shell protection grade: IP21
Net weight: 14.75 kg
Gross weight: 18.1 kg
Overall dimensions: 570 x 260 x 440 mm
Maximum welding thickness: 15 mm
Related products

TIG 200P DC
